PIATTO LED

Easy to open
  • Modern LED lamp specially designed to keep up with the times
  • Suitable for lighting stairs, entrances, exteriors, condominiums, bathrooms, etc.
  • Led chips used at high efficiency > 130 lm/w
  • Fast front cover opening system, without the use of tools
  • Operating temperature: -25°C ~ +45°C
  • Voltages 12-24 VAC / DC available on request
  • 3000K – 6000K available on demand

Piatto Led cod. 570094.00T – 570095.00T – 570096.00T – 570097.00T – 570098.00T – 570099.00T – 570100.00T – 570112.00T

Descriptions and settings


IMS SENSOR

the microwave (radar) motion and dusk sensor integrates with the LED plate, which significantly reduces the size of the sensor and allows the use of a larger area of the LED mounting plate. The integrated measuring element sends high frequency electromagnetic waves (5.8 Ghz) and receives an echo. The sensor detects echo changes caused by even the slightest movement in the observed area. Movement in the detection area automatically turns on the lighting. From the moment of switching on, continuous motion causes the lighting to stay on permanently. Only no motion in the detection field triggers the illumination time. Re-motion in the detection field and its disappearance during the time measurement, will release the backup time from the beginning.


LED MODULE WITH 3h POWER SUPPLY FUNCTION.

The voltage-holding module detects the loss of nominai power, ie 230V / 50Hz. lf this happensthe electronic circuii using the current stored in the batteries starts to generate the voltage needed to power the LED panel. Worth it Please note that the LED panel with the voltage retention function is based on our design and is used in our luminaires. Lighting. The system works in so called. “Emergency-network” mode. Thanks to this, the luminaire can be used as an LED luminaire, and in the case oflack of mains power by using the energy stored in the battery – the module maintains the light source for 3 hours. Loading process And the 230V / 50Hz luminaire power supply test indicates the green LED in the module. An additional advantage of the construction is the fact of using it Rechargeable Li-lon 3.6V 2600 mAh rechargeable battery – manufactured by SAMSUNG.

LED MODULE WITH 3h POWER SUPPLY FUNCTION AVAILABLE WITH LIGHTING FITTINGS